Hardfacing wear resistant plate

- Jul 16, 2019-

The wear-resistant surfacing plate is composed of two parts: a common base material and an anti-wear layer. The anti-wear layer and the base body are completely metallurgically bonded, and there is no need to worry about the wear-resistant layer falling off. The anti-wear layer generally accounts for 1/3-2/3 of the total thickness. During the composite processing of the wear layer, the anti-wear layer is in a cracked state, and the crack cannot extend into the matrix, otherwise the bearing capacity of the substrate is affected. There is no crack between the anti-wear layer and the substrate. Otherwise, the wear layer will fall off during the processing such as deformation or during use, and the anti-wear effect will not be achieved. Cracking cracks make it possible to deform the composite wear-resistant steel plate.

15

Contact US:

Crystal Lu (sales manager)

Shandong Qishuai Wear Resistant Eqiupment Co.,Ltd

Web:www.sdqishuai.com

Email: crystal@zbqishuai.cn

Skype/Wechat:86-17862855620