wear-resistant ceramic rubber composite liner
Anti-impact wear-resistant ceramic rubber composite liner can be divided into two types: anti-impact type wear-resistant ceramic three-in-one lining and anti-impact type anti-wear ceramic two-in-one liner. Impact resistant wear resistant ceramic triad lining board is wear-resisting ceramics, rubber and steel composite, is the small square wear-resisting ceramics at high temperature vulcanization (Mosaic) within the steel tank with special rubber, wear-resistant ceramic rubber lining, forming both shock and buffers to wear layer. Shock type wear-resistant ceramic seal liner is wear-resisting ceramics and rubber compound, is the small square wear-resisting ceramics at high temperature vulcanization (Mosaic) within the special rubber, wear-resistant ceramic rubber lining, in equipment wear installation and use high strength organic adhesive will adhesive lining board in the device's inner shell, sheet metal forming strong and buffers to wear layer. There are two forms of wear-resisting ceramic two-in-one liner:
1. The composite of wear-resistant ceramics and steel plates shall be fixed or welded to the equipment by means of sunk head bolts;
2. The other one is rubber and ceramic composite, which is used to get the chute drop hopper. Specific type selection is based on different transport media, different working conditions, different environment (temperature), depending on different wear conditions.