wear-resistant ceramic rubber composite liner

- Apr 09, 2018-

The wear-resistant ceramic rubber composite liner is made of a square or cylindrical wear-resistant ceramic sheet embedded in the special rubber, and is formed into a lining plate with the CN rubber layer or the steel plate heat vulcanization with the connecting bolt. The lining board is suitable for various types of funnel, strong wear resistance, impact resistance, corrosion resistance, is one of the current domestic most advanced wear-resisting material, noise-deadening is widely used in power plant, coal, mining, ports and other large pieces of material conveying the funnel, bin, etc.

Ceramic rubber composite liner is divided into two types: adhesive type ceramic rubber composite liner and connected ceramic rubber composite liner. Ceramic rubber type adhesive composite lining board for CN bottom layer, construction and equipment by adhesive surface bonding, connection type ceramic rubber composite plate for welding connection bolts at the bottom of the steel plate, when the construction is connected to the equipment surface of fixed by bolts. Ceramic surface into a plane and spherical form, the impact of the blanking point face directly using spherical model, other wear surface in the case of planar, spherical ceramic pieces of the specifications of the 17.9 x 17.9 x 10 (mm), the adhesive of the specifications of the lining board is 250 x 250 x 15 (mm), the connection of the specifications of the lining board is 250 * 250 * 21 (mm); The specification of the flat ceramic block is 17.9 x 17.9 x 7.5(mm), the size of the adhesive type is 250 x 250 * 12.5(mm), and the specification of the connecting liner is 250 x 250 x 18.5(mm).


Flora Hu