The ceramic tube or ceramic sleeve sintered as a whole part, and then assemble it into the steel pipe with our ceramic adhesive. Its main raw material is a special kind of ceramic with AL2O3 and the rare metal oxide as the flux, which is melted by high temperature at 1700 °C.
The big diameter ceramic tube / sleeve is a big problem for the ceramic tube manufacturers, because it’s very difficult to control the deformation rate of the ceramic sleeve after it’s sintering.This needs to rely on advanced large-scale isostatic pressing machine to complete. Our company has owned both advantages which are wear resistant ceramic pressing facilities and technologies.
-- High wear resistance;
-- Higher corrosion resistance;
-- Stronger impacting resistance;
-- High temperature resistance
-- Smaller flatness of inside pipe(ceramic flatness≤0.5mm)
More detailed information please feel free to email John.firstname.lastname@example.org if you are interested.