Applications of the rubber ceramic composite plates
The ceramic rubber liner is a small-diameter ceramic chip embedded in special rubber to form a square ceramic rubber liner, and then the high-strength organic adhesive is used to bond the liner to the inner shell steel plate of the device to form a strong and cushioning force. Wear layer.
Ceramic rubber liners are widely used in coal-fired power plants, ash handling systems, and metallurgy and iron and steel industry feed and batching equipment in silos, hoppers and other equipment to do anti-wear liners. The liner can be twisted and cut, suitable for installing various special equipment, and it is resistant to water and weak acid and alkali. This model is limited to use at temperatures below 100°C.
Technical details of the rubber ceramic composite plates
The performences | Unit | No. |
Content of AL2O3 | % | ≥92% |
Density | g/cm3 | 3.62 |
Rockwell hardness | HRA | 88 |
Rupturing toughness | MPa.m1/2 | 4 |
Compression-resistant strength | MPa | ≥850 |
Bend-resistant | MPa | 300 |
Thermal conductivity |
W/m.K
| 24 |
Thermal expansion coefficient | 10-6 m/m.K | 5.0-8.3
|