The product structure is embedded in the special rubber to form the rubber ceramic composite liner, and then the high-strength organic adhesive is used to bond the liner to the inner shell steel plate of the device to form a strong and cushioning wear layer.
Use as a wear-resistant two is widely used in coal-fired power plants, ash discharge systems and metallurgical steel industry, silos, hoppers and other equipment.
Physical index tensile strength ≥ 12Mpa; elongation ≥ 250%; permanent deformation ≤ 20%; shear strength ≥ 3Mpa; temperature resistance ≤ 100 ° C
1. It is wear-resistant and adopts the unique formula of corundum as the main component and a variety of special materials. It is 600 tons of press-formed, featuring high density, high toughness and wear resistance. Tested by the Shanghai Institute of Ceramics of the Chinese Academy of Sciences, the wear resistance of the wear-resistant ceramics produced by our company is equivalent to 266 times that of manganese steel and 171.5 times that of high-chromium cast iron.
2. Resistance to severe cold, high temperature and water resistance, acid and alkali resistance. The special components in the rubber ceramic wear-resistant lining plate make the rubber not change the internal structure at the temperature of -50 °C - 100 °C, thus avoiding the aging of the rubber and the falling off of the ceramic sheet.
3. Can be twisted and cut; suitable for installing a variety of special-shaped equipment.
4. Ceramic lining adheres firmly to steel: In the bonding of ceramic lining and steel, we use imported special metal and rubber adhesive. The product has strong adhesive strength, good heat resistance, acid and alkali resistance, aging resistance, and wide operating temperature (-50 ° C -100 ° C).