Ceramic liner and steel paste are firmly embedded in ceramic lining and steel. We use imported special metal and rubber adhesive. rubber ceramic lining plate has the characteristics of strong adhesion, good heat resistance, acid and alkali resistance, corrosion resistance and aging. As a special adhesive for our rubber ceramic lining plates, it has been used in hundreds of customers in the past ten years and is very reliable. So far, there is no problem of product shedding. Organic adhesive is the highest heat resistance of 100 ℃, the minimum 50 ℃ below zero. Is mainly used in the rubber ceramic lining plates, due to the organic sticky sticky relay is strong, lining board and equipment large contact area at the same time, very suitable for big impact, severe abrasion wear of conveying system, such as power plant coal conveying system, steel, smelting sintering plant, etc.
No. | Item | Unit | Index |
1 | Bulk Density | g/cm3 | ≥3.65 |
2 | Compressive Strength | Mpa | ≥850 |
3 | Alumina Content | % | ≥92 |
4 | Rockwell Hardness (HRA) | - | ≥87 |
5 | Fracture Toughness (KIC) | MPa•m½ | ≥4.8 |
6 | Bending Strength | MPa | ≥290 |
7 | Thermal Conductivity | W/m.K | 20 |
8 | Coefficient of thermal expansion | m/m.K | 7.2*10-6 |
Main Technical Parameter of Rubber
No. | Item | Unit | Index |
1 | Tensile Strength (TSB) | Mpa | ≥12 |
2 | Break Extension | % | ≥300 |
3 | Shore Hardness | degree | 55~65 |
4 | Break Permanent Deformation | % | ≤24 |
5 | Rubber and Ceramic Adhesion Force (Shearing Stress) | Mpa | ≥3.0 |
6 | Temperature Resistance | °C | ≤100-300 |
7 | Rubber Aging Life | year | ≥8 |
8 | Gap Between Tile | mm | 0.8-1.0 |
9 | Rubber Edge | mm | 1.5-2.0 |