Wear resistant ceramic Composite plates are designed and manufactured by vulcanizing our 92 % alumina tiles into the rubber backing.
Wear resistant ceramic tile rubber backed mats are excellent in high
impact /abrasion applications to absorb impact while also offering excellent sliding
abrasion resistance.These are easily installed by means of bonding directly to steelwork.
The performence | Content of AL2O3 | ≥92% |
Density | ≥3.6 g/cm3 | |
Rockwell hardness | ≥85 HRA | |
Rupturing toughness | ≥5.0MPa.m1/2 | |
Compression-resistant strength | ≥850MPa | |
Bend-resistant | ≥290MPa | |
Pull-apart strength(MPa) | ≥7.5 | |
Pull-apart prolongation(%) | ≥300 | |
Shore hardness | 55-65 | |
Permanent deform(%) | ≤24 | |
Adhesion of the adhesive agent and the ceramic(MPa) | ≥3.0 | |
The form service life of the adhesive agent | ≥15 | |
Temperature-resistant | ≤250°C | |
Coefficient of conducting heat. | 20w/m.k | |
The performance to be nonflammable | excellent | |
Coefficient of heat-expandability | 7.2×10-6m/m.K |
