Isostatic press ceramic tube is made by isostatic pressing progress, isostatic presses are used for compressing pharmaceutical particles and raw material in to pre-determined shapes. The use of this pressurizing system ensures a uniform compaction pressure throughout the powder mass and a homogeneous density distribution in the final product. It is one of the most widely used pharmaceutical processing machines. After fine grinding and polishing pipe’s surface, it is compositely assembled with other pipes. It has complete specifications, and the size range is 50-750mm in diameter.
1.Good wear resistance:Rockwell hardness is HRA80-90, under the same conditions of wear resistance, it is 10 times than ordinary pipelines.Because powder is compacted with the same pressure in all directions, and, since no lubricant is needed, high and uniform density can be achieved. It has better corrosion resistant for strong acid and alkali. So it is widely used in different pipelines as wear-resistant layer.
2.Good scour resistance: can resist larger particles without breaking.
3.Smooth inner and outer wall、good airflow: Smooth surface allows the material to pass freely without hanging or blocking.
4.Lower maintenance cost: Super abrasion resistance greatly reduces the maintenance frequency, saving costs and labor costs.
5.Good heat resistance: The product has good thermal stability and can be used for a long time below 800 ° C.
6.Longer service life: Isostatic pressure pipe is a whole pipe fired with alumina ceramics, it will not fall off even if it is severely worn.
It is widely used in industries such as mining/cement/power generation,etc.
Welcome to email me at John.firstname.lastname@example.org if you are interested.